全球電子通訊法規月報 (2026年1月) Global Market Access Newsletter January 2026

加拿大

Canada

加拿大創新、科學及經濟發展部(ISED)於2025年12月1日發布第2025-DRS0008號通知，針對行動裝置相機凸起處的SAR量測要求提供進一步說明。

該通知旨在針對具備相機凸起設計的無線通訊設備，徵詢公眾對於其SAR量測標準的意見。

考量因素包括：
1. 相機凸起處的形狀
2. 設備與人體間的間隔距離
3. 天線配置位置

意見徵詢期截止日為2026年2月10日，詳細資訊請參閱ISED官方網站。

On December 1, 2025, Innovation, Science and Economic Development Canada (ISED) announced Notice 2025-DRS0008, providing clarification on specific absorption rate (SAR) measurement requirements for camera protrusions, also referred to as camera bumps.

The notice seeks public comments on SAR measurement criteria for wireless devices in which the camera protrudes from the main body, considering factors such as the shape of the camera protrusion, separation distance from the human body, and antenna location.

Comments may be submitted until February 10, 2026. Further details are available on the ISED website.

加拿大創新、科學及經濟發展部(ISED)於2025年12月19日針對救難無線電通訊設備的認證要求修訂草案展開公眾諮詢，主要涉及RSS-287第4版及RSS-288第2版之內容。

修訂規範適用範圍如下：
1. RSS-287：適用於緊急位置指示無線電設備，包含：
‒ EPIRB (緊急位置指示無線電示標)
‒ ELT (緊急定位發射機)
‒ PLB (個人定位示標)
‒ MSLD (海上倖存者定位裝置)
2. RSS-288：規範全球海上遇險及安全系統(GMDSS) 設備的技術要求。

關鍵時程與資訊：本草案之意見徵詢期將持續至2026年3月18日止，欲瞭解更多詳細技術內容，可至ISED官方網站查詢。

On December 19, 2025, Innovation, Science and Economic Development Canada launched a public consultation on draft amendments to certification requirements for distress radio communication equipment, through RSS-287 Issue 4 and RSS-288 Issue 2.

RSS-287 applies to emergency position-indicating radio equipment, including EPIRBs (Emergency Position-Indicating Radio Beacons), ELTs (Emergency Locator Transmitters), PLBs (Personal Locator Beacons), and MSLDs (Maritime Survivor Locating Devices), while RSS-288 specifies technical requirements for Global Maritime Distress and Safety System (GMDSS) equipment. Comments may be submitted until March 18, 2026. Further details are available on the ISED website.

開曼群島

Cayman Islands

開曼群島效用管理局(OfReg) 根據《資通訊技術法(2019年修訂版)》第23(2)條發布更新公告。該條例要求OfReg必須於政府公報(Gazette) 上刊登公告，明確界定必須取得執照的資訊通訊技術(ICT) 網路與服務之類別。

此項規定除符合特定豁免條件 (例如：私人非商業用途之有線系統)外，所有ICT業務營運皆須強制取得執照。該公告旨在確保法規監管、促進市場公平競爭，並維護整體資通訊產業的技術標準。

The Utility Regulation and Competition Office of the Cayman Islands (OfReg) issued updated Notice in accordance with Section 23 (2) of the Information and Communications Technology Act, (2019 Revision) that requires the OfReg to publish in the Gazette a notice specifying which types of Information and Communications Technology (ICT) Networks and Services are required to be licensed. It mandates that all ICT operations must be licensed unless they meet specific exemptions (e.g., private non-commercial wireline systems).

The notice ensures regulatory oversight, promotes fair competition, and maintains technical standards across the ICT sector.

中國

China

中國國家認證認可監督管理委員會(CNCA) 於2025年12月28日根據《中華人民共和國認證認可條例》相關規定，決定調整強制性產品認證(CCC認證) 目錄中部分產品的認證模式，全面實施第三方認證評估方式。

重點摘要如下：
1. 納入第三方認證之產品清單
自2027年1月1日起，以下16類產品必須取得CCC認證證書方可出廠、銷售：
‒ 電子電工：熔斷器(保險絲)、低功率馬達。
‒ 電動工具：電鑽、電磨、電鎚。
‒ 焊接設備：直流電弧焊機、TIG焊機、MIG/MAG焊機、電漿弧切割機。
‒ 汽車零組件：汽車安全玻璃、汽車安全帶、機動車外部照明及光信號裝置、機動車間接視野裝置(後視鏡等)、汽車座椅及頭枕、汽車行車記錄器、車身反光識別標誌。

2. 認證申請與自我聲明轉換
‒ 啟動日期：指定認證機構自2026年7月1日起開始受理上述16類產品的CCC認證委託(認證機構將另行指定)。
‒ 銜接機制：對於持有有效「自我聲明(Self-declaration)」的產品，指定認證機構應在確保質量與風險受控的前提下，積極採納原自我聲明之評估結果，並換發CCC認證證書。
‒ 系統更迭：屆時系統將不再受理及產生相關產品的自我聲明。

3. 證書轉換期限
‒ 換證要求：相關企業應於2026年12月31日前完成CCC認證證書轉換，並主動註銷相對應的自我聲明。
‒ 特例處理：於自我聲明有效期內已出廠且不再生產之產品，無需換證即可繼續銷售。

China CNCA decided to adjust the certification mode of some products in the compulsory product certification (CCC certification) catalogue and implement the third-party certification evaluation method according to the relevant provisions of the Regulations on Certification and Accreditation of People's Republic of China (PRC) on December 28, 2025。

The summary is as follows：

1. From January 1, 2027, 16 kinds of products, such as fuse link, low-power motor, electric drill, electric grinder, electric hammer, DC arc welder, TIG arc welder, MIG/MAG arc welder, plasma arc cutter, automobile safety glass, automobile seat belt, external lighting and light signal device of motor vehicle, indirect vision device of motor vehicle, automobile seat and headrest, automobile traveling recorder and body reflective logo, shall obtain CCC certification.
2. From July 1st, 2026, the designated certification bodies began to accept CCC certification entrustment for the above 16 products (certification bodies will be designated separately). For products with valid self-declaration, the designated certification body shall actively adopt the evaluation results of self-declaration and renew CCC certification certificate on the basis of ensuring the certification quality and risk control. The system no longer accepts and generates self-declaration of related products.
3. The enterprise shall complete the conversion of CCC certification certificate before December 31, 2026, and take the initiative to cancel the corresponding self-declaration in time. For those that have already left the factory and are no longer produced within the validity period of self-declaration, they can continue to sell without conversion.

迦納

Ghana

迦納國家通訊管理局(NCA)於2026年1月8日發布公眾諮詢文件，提議授權將Wi-Fi6E相關技術5925–6425MHz(6GHz頻段)用於無線近接系統(WAS) 及無線區域網路(RLAN)，並對此提議提交評論與建議截止日期為2026年2月25日。

On 8 January 2026, Ghana’s National Communications Authority (NCA) issued a public consultation proposing to authorise the use of the 5925–6425 MHz (6 GHz) band for Wireless Access Systems (WAS) / Radio Local Area Networks (RLANs). Stakeholders are invited to submit comments and recommendations no later than 25 February 2026.

巴布亞紐幾內亞

Papua New Guinea

巴布亞紐幾內亞國家資訊及通訊科技管理局(NICTA) 已更新其型式認證程序，正式啟用全新的線上型式認證系統(Type Approval Online System, TAOS)。

本次更新的核心變動在於證書有效期調整為3年，具體過渡措施如下：
1. 2022年以前核發之證書：必須透過正式申請程序辦理重新換證。
2. 2022年以後核發之證書：須重新核發並轉換為3年有效期的證書。

The National Information and Communications Technology Authority (NICTA) of Papua New Guinea has updated their type approval process, introduced the new Type Approval Online System (TAOS).

The main change is about the cert validity has changed to 3 year validity. For the certificates issued before 2022 must be renewed via formal application. Certificates issued after 2022 need to re-issued with 3-year validity.

歐盟

European Union

歐盟委員會於2025年12月1日發布與《數位韌性法案》(Cyber Resilience Act, CRA) 相關的第(EU)2025/2392號規例，針對被歸類為「重要(Important)」與「關鍵(Critical)」具備數位元素之產品，詳列其技術描述。

該規例旨在進一步釐清CRA原已定義之重要與關鍵類別產品的功能與技術特徵，並為產品的類別判定(Classification) 及未來符合性評估(Conformity Assessment) 的應用提供解釋性準則。

本規例已於2025年12月21日正式生效，詳細內容請參閱歐盟委員會官方網站。

On December 1, 2025, the European Commission issued Regulation (EU) 2025/2392 related to the Cyber Resilience Act (CRA), specifying technical descriptions for products with digital elements classified as “Important” and “Critical.”

The regulation aims to clarify the functional and technical characteristics of products falling under the important and critical categories already defined in the CRA, providing interpretative criteria for product classification and the future application of conformity assessment.

The regulation entered into force on December 21, 2025. Further details are available on the European Commission website.

歐洲電信標準協會(ETSI)於2025年12月發布多項配合《數位韌性法案》(CRA) 要求的標準草案，其標準將成為未來相關產品進入歐盟市場時，符合資安強制性要求的技術基準。

已發布的標準草案清單如下：
‒ EN304-617 瀏覽器(Browsers)
‒ EN304-618 密碼管理器(Password managers)
‒ EN304-619防毒與抗惡意軟體(Antivirus and antimalware software)
‒ EN304-620：虛擬私人網路(VPNs)
‒ EN304-621：網路管理系統(NMS)
‒ EN304-622：安全資訊與事件管理(SIEM)
‒ EN304-623：開機管理程式(Boot managers)
‒ EN304-624：公鑰基礎設施(PKI)及數位憑證核發軟體
‒ EN304-625：網路介面(Network interfaces)
‒ EN304-626：作業系統(OS)
‒ EN304-627：路由器、數據機及交換器(Routers, modems and switches)
‒ EN304-635：虛擬化執行堆疊與容器執行堆疊(Virtualisation and Container Execution Stack)
‒ EN304-636：防火牆(Firewalls)

In December 2025, the European Telecommunications Standards Institute (ETSI) released draft standards under the Cyber Resilience Act (CRA).

The published draft standards include the following:
‒ EN 304-617: Browsers
‒ EN 304-618: Password managers
‒ EN 304-619: Antivirus and antimalware software
‒ EN 304-620: Virtual Private Networks (VPNs)
‒ EN 304-621: Network Management Systems (NMS)
‒ EN 304-622: Security Information and Event Management (SIEM)
‒ EN 304-623: Boot managers
‒ EN 304-624: Public Key Infrastructure and digital certificate issuance software
‒ EN 304-625: Network interfaces
‒ EN 304-626: Operating Systems (OS)
‒ EN 304-627: Routers, modems and switches
‒ EN 304-635: Virtualisation Execution Stack and Container Execution Stack
‒ EN 304-636: Firewalls

越南

Vietnam

越南科學技術部(MST)先前針對6GHz頻段運作之無線進接設備技術法規進行公眾諮詢，並於2025年11月30日正式發布第41/2025/TT-BKHCN號部令。

該部令正式頒布針對6GHz無線設備的技術規範QCVN 136:2025/ BKHCN，其重點摘要如下：
1. 生效日期：本法規將於2027年1月1日起正式施行。
2. 新舊更迭：自新法規生效之日起，原有的技術標準QCVN 47:2015/BTTTT將廢止並停止適用。

The Ministry of Science and Technology (MST) of Vietnam previously held a public consultation on the Technical Regulation on Radio Access Equipment Operating in the 6 GHz Band.

MST published Circular No. 41/2025/TT-BKHCN on November 30, 2025. This Circular promulgates QCVN 136:2025/BKHCN for 6 GHz Wireless Devices, and comes into effect on January 1, 2027, at which point the previous standard QCVN 47:2015/BTTTT will no longer be in effect.

越南科學技術部(MST) 先前針對「終端與輔助設備電磁相容性部令草案」進行公眾諮詢，隨後於2025年12月31日正式發布第52/2025/TT-BKHCN號部令，正式頒布QCVN 86: 2025/BKHCN數位行動通訊系統終端設備及其輔助設備之電磁相容性(EMC)要求，並於2026年2月16日生效。

The Ministry of Science and Technology (MST) of Vietnam previously held a public consultation on the Draft Circular on Electromagnetic Compatibility for Terminal and Ancillary Equipment.

MST published Circular No. 52/2025/TT-BKHCN on December 31, 2025, which promulgates the national technical regulation on EMC for mobile terminal and ancillary equipment of digital cellular telecommunications systems (QCVN 86:2025/BKHCN). This Circular comes into effect on February 16, 2026.

印度

India

印度國家通訊安全中心(NCCS) 於2025年12月29日發布通知，宣布簡化光網路終端(ONT) 設備的測試與驗證程序，並於2026年1月1日發布另一項補充通知，澄清光網路單元(ONU) 設備亦須遵循NCCS針對ONT設備所發布之相同指令、通告、官方備忘錄(OM) 及公告規範。

The National Center for Communication Security (NCCS) of India published a notification on December 29, 2025, simplifying the testing and certification process for ONT devices.

NCCS issued another notification on January 1, 2026, clarifying that ONU devices follow the same instructions, circulars, OMs, and notifications issued by NCCS for ONT devices.

印度電信工程中心(TEC) 於2025年12月29日發布正式通知，宣布針對下列特定產品之技術參數，將持續採納由非接壤鄰國(non-border sharing countries)實驗室核發之ILAC測試報告，期限延長至2026年6月30日。

其強調，提交至MTCTE認證平台時，該測試報告的簽發日期不得超過2年。

適用產品範圍如下：

1. 行動網路基地台(Base Station for Cellular Network)
2. SIM卡(SIM)
3. VHF/UHF無線電設備系統(VHFUHF Radio Equipment System)
4. E-band固定無線電中繼系統(E-band Fixed Radio Relay Systems)

The India Telecommunication Engineering Centre (TEC) published a Notification on December 29, 2025, announcing that ILAC Test Reports from non-border sharing countries will be acceptable until June 30, 2026, for technical parameters for the products below.

These Test Reports should be no older than 2 years from the date they were submitted to the MTCTE Portal.

1. Base Station for Cellular Network
2. SIM
3. VHF UHF Radio Equipment System
4. E-band Fixed Radio Relay Systems

印度電信工程中心(TEC) 於2025年12月29日發布正式通知，宣布針對下列特定產品之技術參數，將持續採納由非接壤鄰國(non-border sharing countries)實驗室核發之ILAC測試報告，期限延長至2026年6月30日。

其強調，提交至MTCTE認證平台時，該測試報告的簽發日期不得超過2年。

適用產品範圍如下：

1. 行動網路基地台(Base Station for Cellular Network)
2. SIM卡(SIM)
3. VHF/UHF無線電設備系統(VHFUHF Radio Equipment System)
4. E-band固定無線電中繼系統(E-band Fixed Radio Relay Systems)

The India Telecommunication Engineering Centre (TEC) published a Notification on December 29, 2025, announcing that ILAC Test Reports from non-border sharing countries will be acceptable until June 30, 2026, for technical parameters for the products below.

These Test Reports should be no older than 2 years from the date they were submitted to the MTCTE Portal.

1. Base Station for Cellular Network
2. SIM
3. VHF UHF Radio Equipment System
4. E-band Fixed Radio Relay Systems

印度電信部(DoT) 於2026年1月20日發布第GSR47(E)號政府公報，針對6GHz低頻段(Lower 6GHz band) 的使用規範做出正式公告。

摘要如下：

The Department of Telecommunications (DoT) of India released Gazette Notification GSR 47(E) on 20^th Jan., 2026 for the lower 6GHz band.

See as below:

印尼

Indonesia

印尼通訊與數位部(Komdigi) 已針對第KM Komdigi No.352/2024號法令進行修訂，並於2025年12月19日正式發布KEPMEN KOMDIGI No.569 Tahun 2025號部令，並於2026年1月19日起正式生效。

針對具備B41 (LTE) 或n41 (5GNR) 頻段功能的產品，新規範如下：
1. 對已取證產品，要求進行重新認證：
即便產品目前已持有有效證書，自2026年1月19日起，皆必須依照新法規重新辦理認證。
2. 生效時程：所有相關設備製造商或進口商須於生效日後，確保其產品符合最新技術標準及認證程序。

Kementerian Komunikasi dan Digital (Komdigi) in Indonesia revised KM Komdigi No. 352/2024, publishing KEPMEN KOMDIGI No. 569 Tahun 2025 on December 19, 2025. This new regulation will come into effect on January 19, 2026.

Products using the B41/n41 band feature that already have a certificate will need to be re-certified starting January 19, 2026.

印尼數位基礎設施總局(DJID) 根據2025年第12號部長令(KEPMEN)，針對運作於5925- 6425MHz頻段之Wi-Fi6GHz設備發布最新測試要求。

根據新法規架構，測試報告採納標準分為兩階段：

1. 第一階段：至2026年1月15日止
DJID僅接受由印尼國家電信測試中心BBPPT所核發之Wi-Fi 6GHz測試報告。

2. 第二階段：自2026年1月15日起DJID將放寬採納範圍，接受由下列機構核發之Wi-Fi 6GHz測試報告。
‒ 印尼在地經認可之實驗室。
‒ 與印尼簽署相互承認協議(MRA)之海外實驗室 (該實驗室必須持有相關技術領域之測試認證資質)。

DJID同時指出，印尼當地實驗室目前正積極取得Wi-Fi 6GHz的測試認證資質，預計在法規轉型日之前，將能大幅提升印尼國內的測試量能。

Indonesia’s Direktorat Jenderal Infrastruktur Digital (DJID) has announced new testing requirements for Wi-Fi 6 GHz devices operating in the 5925–6425 MHz band, in accordance with Ministerial Decree (KEPMEN) No. 12 of 2025.

Under the new framework:

Until 15 January 2026, DJID will accept Wi-Fi 6 GHz test reports issued exclusively by BBPPT, Indonesia’s national telecommunications testing centre.

From 15 January 2026 onward, DJID will accept Wi-Fi 6 GHz test reports issued by:

Accredited local laboratories in Indonesia, and Overseas laboratories that have signed a Mutual Recognition Agreement (MRA) with Indonesia, provided the laboratories hold the relevant testing accreditation.

DJID also noted that local laboratories in Indonesia are currently in the process of establishing Wi-Fi 6 GHz testing accreditation, which is expected to expand local testing capacity ahead of the transition date.

南韓

South Korea

南韓國立無線電研究院(RRA) 於2025年12月31日發布第2025-22號公告，宣布對電磁相容(EMC)標準進行部分條文修訂。

本次修訂源於5G行動通訊寬頻無線電波導致月台門(Plat form Screen Door, PSD)感測器發生故障之事件，故基於公共安全考量提出此應對措施。其核心目的在於確保PSD雷射感測器 (含光達LiDAR感測器) 具備足夠的寬頻輻射抗擾性。

修訂摘要如下：

1. 「多媒體設備EMC標準」：更新外殼連接埠(Enclosure Ports)的抗擾性準則，新增針對「寬頻輻射射頻電磁場(Broad band radiated RF electromagnetic fields)」的抗擾性要求。
2. 相關法規銜接：修訂本公告之施行日期，並同步調整其他相關聯之公告條文。
3. 本修訂規範將自公布之日起6個月後正式施行。

On December 31, 2025, the National Radio Research Agency (RRA) of Korea announced a partial amendment to the Electromagnetic Compatibility (EMC) Standards through Notification No. 2025-22.

The amendment is related to malfunction incidents of platform screen door (PSD) sensors caused by broadband radio waves from 5G mobile communications and was introduced as a public safety measure.

It aims to secure broadband radiated immunity for PSD laser sensors, including LiDAR sensors.

Key amendments include the following:

1. 「EMC Standards for Multimedia Equipment」, the immunity criteria for enclosure ports are updated to add immunity requirements for “broadband radiated RF electromagnetic fields”
2. Revision of the enforcement date of the notification and amendments to other related notifications
3. The amended regulation will enter into force six months after the date of promulgation.

巴基斯坦

Pakistan

巴基斯坦電信管理局(PTA) 於2025年12月18日發布《短距設備(SRD)與地面物聯網(IoT)服務監管框架V1.4》。新規範強化對長距離物聯網佈署的監管，並對LPWAN(低功耗廣域網路) 營運商施加更嚴格的合規義務。

摘要如下：

1. 閘道器與數據管理：LPWAN持照者須向PTA註冊每一座物聯網閘道器(Gateway)。
   ‒ 未經PTA事先核准，禁止將物聯網數據儲存於巴基斯坦境外。
   ‒ 基於國家安全考量，PTA有權要求立即中止物聯網服務。
2. 營運合規要求：持照者須每半年提交一次運作中之閘道器清單。
   ‒ LPWAN網路產生的後端流量(Backend Traffic)必須經由取得PTA執照的「在地存取提供者(Local Access Providers)」進行路由。
   ‒ 於共享頻段運作之物聯網網路，須遵循「次要、無干擾、不受保護」之原則。
3. 執照制度與期限：LPWAN執照將依據「分級加值服務(CVAS)」體系核發，有效期為5年，並可依聯邦政府政策續約。
   ‒ 執照持有者須於核發後一年內啟動服務，否則執照將自動廢止。
   ‒ 現有持照者則須在新規框架發布一年內取得「開通證明(Commencement Certificates)」。
4. 特定業者規範：行動通訊營運商及在地迴路(Local Loop)持照者在指定頻段提供物聯網服務時，無需另行申請LPWAN執照，但仍須事先取得PTA核准。
   ‒ 任務關鍵型(Mission-critical) 物聯網服務(如公共安全、公用事業、交通等) 僅限於使用專屬分配或已獲授權之頻段。

The Pakistan Telecommunication Authority (PTA) released the Regulatory Framework for Short-Range Devices (SRD) & Terrestrial Internet of Things (IoT) Services V1.4 on December 18, 2025. All Low Power Wide Area Network (LPWAN) licensees are required to register each IoT gateway with PTA. The framework bars the storage of IoT data outside Pakistan without prior approval from PTA and empowers the regulator to order immediate suspension of IoT services on national security grounds.

The revised framework strengthens oversight of long-range IoT deployments by imposing enhanced compliance obligations on LPWAN operators. Licensees must submit updated lists of operational gateways on a bi-annual basis and ensure that backend traffic generated through LPWAN networks is routed via PTA-licensed Local Access Providers. It also specifies that IoT networks operating in shared spectrum will function strictly on a secondary, non-interference, and non-protection basis.

Under the new rules, LPWAN licenses will be issued under the Class Value-Added Services (CVAS) regime for a five-year period, renewable in line with federal government policy. License holders are required to commence services within one year of license issuance, failing which the license will be automatically cancelled. Existing LPWAN licensees have also been directed to obtain commencement certificates within one year of the issuance of the revised framework.

PTA has clarified that Cellular Mobile Operators and Local Loop licensees will not require a separate LPWAN license to offer IoT services in designated LPWAN bands, though prior approval from the Authority will remain mandatory.

Mission-critical IoT services, including those related to public safety, utilities, and transport, will be permitted only through exclusively assigned or licensed frequency bands.

巴拉圭

Paraguay

巴拉圭國家通訊傳播委員會(CONATEL)發布第3339/2025號決議，修訂其「國家頻率分配計畫(NFAP)」，正式分配頻譜以支援國際行動通訊(IMT)，包含5G服務，並本決議已於2025年12月17日正式生效。

1. 5G頻段指定：CONATEL已指定3700- 3800MHz頻段供IMT系統使用，以利部署行動寬頻與5G服務。
2. PRG-25條款修正(新增兩項規定)：
   (1) 2300-2400MHz及3300- 3800MHz頻段可用於透過無線固定存取系統(WFA)提供網際網路存取與數據傳輸服務。
   (2) 目前運作於3700- 3800MHz頻段的衛星系統，必須依據CONATEL設定的條件與時程遷移至其他替代頻率，以配合IMT的部署。
3. PRG-51條款修訂：將3800- 4200MHz頻段主要指定給固定衛星服務(FSS)使用。
4. PRG-71條款更新：
   ‒ 頻段下限由3400 MHz擴展至3300 MHz，並將3300- 3800MHz指定為主要行動服務用途。
   ‒ 該頻譜將採時分雙工(TDD)模式，劃分為10個50MHz子頻段(10×50MHz)，支援行動通訊與數據服務。原3700- 3800MHz的衛星系統必須遷移。
5. PRG-74條款修訂：
   ‒ 2300- 2400MHz頻段主要指定給行動服務(含IMT與行動電話)，採TDD配置(2x50MHz)。

Paraguay’s Comisión Nacional de Telecomunicaciones (CONATEL) has issued Resolution No. 3339/2025, introducing amendments to the National Frequency Allocation Plan (NFAP) and formally allocating spectrum to support International Mobile Telecommunications (IMT), including 5G services.

1. CONATEL has designated the 3700–3800 MHz frequency band for use by IMT systems, enabling the deployment of mobile broadband and 5G services.
2. Amendments to PRG-25: Two new provisions have been added:

1. The 2300–2400 MHz and 3300–3800 MHz bands may be used to provide internet access and data transmission services via wireless fixed access systems.
2. Satellite systems currently operating in the 3700–3800 MHz band are required to migrate to alternative frequencies, in line with conditions and timelines established by CONATEL, to facilitate IMT deployment.

3. Revision of PRG-51: The 3800–4200 MHz band is now designated primarily for Fixed Satellite Service (FSS).
4. Update to PRG-71: The lower limit of the band has been extended from 3400 MHz to 3300 MHz, designating 3300–3800 MHz for primary mobile service use. This spectrum will support IMT systems, including mobile cellular, internet access, and data transmission services, operating in TDD mode with ten 50 MHz sub-bands (10 × 50 MHz). Satellite systems operating in 3700–3800 MHz must migrate to enable IMT deployment.
5. Revision of PRG-74: The 2300–2400 MHz band is designated primarily for mobile services, including IMT systems, cellular mobile telephony, and internet access and data transmission services, operating under TDD configuration (2 × 50 MHz channels).

The resolution entered into force on 17 December 2025.

烏茲別克

Uzbekistan

烏茲別克內閣於2025年8月15日原核准之第517號內閣決議，該決議頒布《關於限制電機與無線電電子產品使用特定有害物質之技術規範》，並將於2026年2月15日起正式施行。

本法規針對在烏茲別克市場銷售的電機電子設備(EEE)，明定其均質材料中特定有害物質的最大允許濃度限制，其最大允許濃度限值包括：

1. 鉛(Pb):0.1%
2. 汞(Hg):0.1%
3. 鎘(Cd):0.01%
4. 六價鉻(Cr⁶⁺):0.1%
5. 多溴聯苯(PBB):0.1%
6. 多溴聯苯醚(PBDE):0.1%
7. 鄰苯二甲酸二(2-乙基己基)酯(DEHP):0.1%
8. 鄰苯二甲酸丁苯甲酯(BBP):0.1%
9. 鄰苯二甲酸二丁酯(DBP):0.1%
10. 鄰苯二甲酸二異丁酯(DIBP):0.1%

本規定適用於電氣和電子產品，但以下產品除外：

1. 僅供出口之產品。
2. 軍事及國防系統。
3. 醫療器材與監測儀器(目前暫時豁免)。
4. 大型固定式工業工具及裝置。
5. 客運或貨運車輛。

受本規範約束之製造商與進口商，必須根據適用的符合性評估程序，透過符合性聲明(Declaration of Conformity)或認證(Certification)證明其產品符合規範要求。

On February 15, 2026, the Cabinet of Ministers of Uzbekistan will bring into force Cabinet Resolution No. 517, which approves the Technical Regulation on the Restriction of the Use of Certain Hazardous Substances in Electrical and Radio-Electronic Products. The regulation was originally approved on August 15, 2025.

The regulation establishes restrictions on the use of hazardous substances in electrical and electronic equipment placed on the national market. The restricted substances and maximum allowable concentration limits in homogeneous materials include:

1. Lead (Pb): 0.1%
2. Mercury (Hg): 0.1%
3. Cadmium (Cd): 0.01%
4. Hexavalent chromium (Cr⁶⁺): 0.1%
5. Polybrominated biphenyls (PBB): 0.1%
6. Polybrominated diphenyl ethers (PBDE): 0.1%
7. Di(2-ethylhexyl) phthalate (DEHP): 0.1%
8. Butyl benzyl phthalate (BBP): 0.1%
9. Dibutyl phthalate (DBP): 0.1%
10. Diisobutyl phthalate (DIBP): 0.1%

The regulation applies to electrical and electronic products, except for the following:

1. Products intended exclusively for export
2. Military and defence systems
3. Medical devices and monitoring instruments (temporarily exempted)
4. Large-scale stationary industrial tools and installations
5. Vehicles for transporting passengers or goods

Manufacturers and importers of products subject to the regulation are required to demonstrate compliance through a Declaration of Conformity or Certification, in accordance with the applicable conformity assessment procedures.

黎巴嫩

Lebanon

自 2026 年 1 月起，黎巴嫩電信管理局 (TRA) 已全面接掌電信設備型式認證 (Type Approval) 之職權。原主管機關通訊部 (MoT) 已於 2025 年 12 月 10 日起停止核發相關證書。

目前 TRA 為黎巴嫩境內唯一負責無線電及電信設備進口許可、認證核發與法規監管的權責單位，此項變革旨在優化合規流程並統一技術標準。

From January 2026, the Telecommunications Regulatory Authority (TRA) of Lebanon has fully assumed responsibility for telecommunications equipment type approval, taking over from the Ministry of Communications (MoT), which stopped issuing certificates from December 10^th, 2025. TRA is now the sole Authority for importing, certifying, and regulating radio/telecom devices, aimed at streamlining compliance and technical standards.